Ajax MotionCam Outdoor white

Wireless outdoor motion detector with a photo camera to verify alarms
MotionCam Outdoor recognizes intrusion from the very first steps on the territory and confirms it with an animated series of photos
Visual verification helps to instantly ascertain the situation, saving users from concerns, and security companies from unnecessary patrol dispatches

Combining the best optics, fast processor and advanced software algorithms, MotionCam Outdoor takes informative pictures in any weather, day or night

MotionCam Outdoor is equipped with two independent PIR sensors, the signals of which are analyzed by a two-step LISA algorithm
When both sensors detect motion, LISA performs correlation and spectral analysis of the signals,
which helps to instantly distinguish real threats from interferences

MotionCam Outdoor can not be unnoticeably disabled even if the system is disarmed
The detector is equipped with masking sensors reacting to hindering, covering and painting the lens
It will take the hub less than a minute to detect the loss of communication with the detector and inform a central monitoring station
and users about the problem. The fact that MotionCam Outdoor was dismantled will become known instantly

MotionCam Outdoor resists the heat up to +60°С and withstand the cold down to −25°С
And to protect the sensors of the anti-masking system from rain and snow, we included a special hood

MotionCam Outdoor uses two secure radio protocols simultaneously: Jeweller and Wings. Radio protocols work independently of each other
and each is focused on its own function. Jeweller transmits alarms in 0.15 seconds, and thanks to Wings
the first shot from the site will be in the app in less than 9 seconds2.
The radio signal range is sufficient to install the detector where it will be most effective
And up to 3 years of battery life minimizes maintenance efforts

 Motion detected

 Alarm raised

 Evidence captured

Tech specs
Classification - Electro-optical radio channel security detector

Type of detector - Wireless

Installation method - Outdoors / indoors

Recommended installation height - 0.8 – 1.3 m

Compatibility - Hub 2, Hub 2 Plus
Not compatible with ReX radio signal range extender

Sensing element - 2 × PIR sensor

Motion detection distance - Adjustable, from 3 to 15 m

Pet immunity - Animals up to 80 cm tall

Sensitivity - Adjustable, 3 levels

Motion detector’s viewing angle
Horizontal — 90°
Vertical — 80°

Camera’s angle
Horizontal — 105°
Vertical — 50°

TV distortion (EBU standard)
Barrel, –17%
Photo in case of alarm

Photo resolution:
320 × 176 pixels (by default)
640 × 352 pixels
Shooting series up to 5 photos

Infrared light for shooting in the dark - Available

Power supply
4 × CR123A batteries
Supply voltage
3 V
Battery life
Up to 3 years (up to 2.5 years if “Delay when entering” setting is activated)

Jeweller radio technology
Communication range with a hub — up to 1,700 m in an open space
Two-way communication between hub and device
Operating frequencies — 868.0–868.6 MHz3
Self-adjusting RF output power — up to 20 mW
Block encryption with a dynamic key
Detector polling period — 12–300 s
Frequency hopping

Alarm delivery time - 0.15 s

Wings radio technology
Transmission of a series of photos
Photo delivery time with a default settings: up to 9 seconds

Temperature sensor - Available

Operating temperature range - From –25°С to +60°С

Operating humidity - Up to 95%

Protection class - IP55

Anti-sabotage
Anti-masking
Protection against forgery
Jamming detection
Tamper-resistant

Remote configuration and testing - Available

CMS compatibility
CMS connectivity: Contact ID, SIA (DC-09)

Dimensions - 206 × 108 × 93 mm

Weight - 470 g

Warranty - 24 months from the date of sale

Complete set
MotionCam Outdoor motion detector
SmartBracket mounting panel
Hood visor
4 × CR123A batteries (pre-installed)
Installation kit
User’s guide